提卡的网站怎么做学习软件的网站
本篇实现对gpio的控制，通过控制输出进行gpio的点灯操作。
硬件
我们来操作IO2，控制绿色的灯。
软件
GPIO API
| API名称 | 说明 |
| hi_u32 hi_gpio_deinit(hi_void); | GPIO模块初始化 |
| hi_u32 hi_io_set_pull(hi_io_name id, hi_io_pull val); | 设置某个IO上下拉功能。 |
| hi_u32 hi_gpio_set_dir(hi_gpio_idx id, hi_gpio_dir dir); | 设置GPIO引脚方向，id参数用于指定引脚，dir参数用于指定输入或输出 |
| hi_u32 hi_gpio_set_ouput_val(hi_gpio_idx id, hi_gpio_value val); | 设置GPIO引脚的输出状态，id参数用于指定引脚，val参数用于指定高电平或低电平 |
| hi_u32 hi_io_set_func(hi_io_name id, hi_u8 val); | 设置引脚功能，id参数用于指定引脚，val用于指定引脚功能 |
| hi_u32 hi_gpio_deinit(hi_void); | 解除GPIO模块初始化 |
修改D:\DevEcoProjects\test\src\vendor\rtplay\rt_hi3861\demo\BUILD.gn文件，让工程编译led代码
# Copyright (c) 2023 Beijing HuaQing YuanJian Education Technology Co., Ltd
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License. import("//build/lite/config/component/lite_component.gni")lite_component("demo") {features = ["base_01_led:base_led_example",]
}
创建D:\DevEcoProjects\test\src\vendor\rtplay\rt_hi3861\demo\base_01_led文件夹
文件夹中创建D:\DevEcoProjects\test\src\vendor\rtplay\rt_hi3861\demo\base_01_led\base_led_example.c文件D:\DevEcoProjects\test\src\vendor\rtplay\rt_hi3861\demo\base_01_led\BUILD.gn文件
# Copyright (c) 2023 Beijing HuaQing YuanJian Education Technology Co., Ltd
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License. static_library("base_led_example") {sources = ["base_led_example.c",]include_dirs = ["//utils/native/lite/include","//kernel/liteos_m/kal/cmsis","//base/iot_hardware/peripheral/interfaces/kits","//vendor/hqyj/fs_hi3861/common/bsp/include"]
}/** Copyright (c) 2023 Beijing HuaQing YuanJian Education Technology Co., Ltd* Licensed under the Apache License, Version 2.0 (the "License");* you may not use this file except in compliance with the License.* You may obtain a copy of the License at** http://www.apache.org/licenses/LICENSE-2.0** Unless required by applicable law or agreed to in writing, software* distributed under the License is distributed on an "AS IS" BASIS,* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.* See the License for the specific language governing permissions and* limitations under the License.*/#include <stdio.h>
#include <unistd.h>#include "cmsis_os2.h"
#include "hi_gpio.h"
#include "hi_io.h"
#include "ohos_init.h"#define LED HI_IO_NAME_GPIO_2 // 开发板三色灯其中一个引脚osThreadId_t Task1_ID = 0; // 任务1 ID
hi_gpio_value val, val_last; // GPIO的状态值
#define TASK_STACK_SIZE 1024
#define TASK_DELAY_TIME (1000 * 1000)/*** @description: 任务1* @param {*}* @return {*}*/
void Task1(void)
{printf("enter Task 1.......\r\n");hi_gpio_init(); // GPIO初始化hi_io_set_pull(LED, HI_IO_PULL_DOWN); // 设置GPIO下拉，保证上电时为灭灯状态hi_io_set_func(LED, HI_IO_FUNC_GPIO_2_GPIO); // 设置IO2为GPIO功能hi_gpio_set_dir(LED, HI_GPIO_DIR_OUT); // 设置GPIO为输入模式while (1) {hi_gpio_set_ouput_val(LED, HI_GPIO_VALUE0); // 设置GPIO引脚为低电平usleep(TASK_DELAY_TIME); // 1s sleephi_gpio_set_ouput_val(LED, HI_GPIO_VALUE1); // 设置GPIO引脚为高电平usleep(TASK_DELAY_TIME); // 1s sleep}
}/*** @description: 初始化并创建任务* @param {*}* @return {*}*/
static void base_led_demo(void)
{printf("[demo] Enter base_led_demo()!\r\n");osThreadAttr_t taskOptions;taskOptions.name = "Task1"; // 任务的名字taskOptions.attr_bits = 0; // 属性位taskOptions.cb_mem = NULL; // 堆空间地址taskOptions.cb_size = 0; // 堆空间大小taskOptions.stack_mem = NULL; // 栈空间地址taskOptions.stack_size = TASK_STACK_SIZE; // 栈空间大小 单位:字节taskOptions.priority = osPriorityNormal; // 任务的优先级:wqTask1_ID = osThreadNew((osThreadFunc_t)Task1, NULL, &taskOptions); // 创建任务1if (Task1_ID != NULL) {printf("ID = %d, Create Task1_ID is OK!\r\n", Task1_ID);}
}
SYS_RUN(base_led_demo);
目录结构
│ config.json
│
├─common
│ └─bsp
│ ├─include
│ └─src
├─demo
│ │ BUILD.gn
│ │
│ ├─base_00_helloworld
│ │ base_helloworld_example.c
│ │ BUILD.gn
│ │
│ └─base_01_led
│ base_led_example.c
│ BUILD.gn
│
└─doc│ HarmonyOS开发板实验指导书 v2.1.pdf│ 华清远见 FS_Hi3861开发指导.md│ 华清远见 FS_Hi3861新手入门手册.md│├─board│ FS-Hi3861-V4.2.pdf│ FS-Hi3861QDB-V3.2.pdf│ hi-12f_kit_v1.1.0A7E6BCB9%A6-20211025.pdf│ hi-12f_v1.1.2-A7E6BCB9%A6-20211202.pdf│ nodemcu-hi-07s_12f-kit_v1.1-20210913.pdf│ RTplay2.01_2024-06-14.pdf│└─figures使用build
效果就是LED间隔1秒闪烁。
